Van deValk ValkBox 3 for 1 solar panel The ValkBox 3-Uni set contains all mounting materials (excluding ballast) for installing one solar panel (landscape) on a flat roof, such as 2 aluminum brackets with a tilt angle of 20 degrees (anodized for a long lifespan)...

ValkQuatro solar mounting system for 4 solar panels (solar panels not included)    The ValkQuattro mounting package from Van der Valk is used for a solar mounting system for four panels on a flat roof. The ValkQuattro Mounting package consists of materials of the...

ValkPitched Universal End Clamp Black for Side+ profile The adjustable black aluminium end clamp from Van der Valk is part of the ValkPitched - Clamp series and is used to secure solar panels to the base profile. The VDV721552ZW is suitable for pitched roofs...

ValkDouble solar mounting system for 2 solar panels (solar panels not included) - new version   The ValkDouble mounting kit from Van der Valk is used for a solar array for two panels on a flat roof. The ValkDouble mounting kit consists of materials...

Van der Valk Ballast Tile 9kg VDV7506303045 - minimum purchase of 10 pieces   The concrete ballast tile from Van der Valk is suitable for creating extra ballast in the PV installation on flat roofs. The VDV7506303045 has dimensions of 30x30x4.5mm and weighs 9kg....

Van der Valk Extension Set Solar Frame 1010 - 1046mm (only for the old version frame ValkDouble, ValkTriple, ValkQuattro before 2026).   To use panels from 1065 to 1134mm for the ValkDouble and ValkTriple, and for ValkQuattro from 1065 to 1100mm, these frames need...

ValkPitched Kst. End Clamp Cover - Black   For a PV installation where most of the components, including the panels, are black, it is often aesthetically desirable to have black clamps as well. In addition to the range of black anodized clamps, it is...

ValkPitched Black Universal Mid Clamp   The black aluminum mid clamp from Van der Valk is part of the ValkPitched - Clamp series and is intended to connect solar panels to each other and fasten them to the base profile. The clamp is mounted...

Stainless steel ValkCableCare hammerhead bolt M8x20 mm with washer M8 28x3 mm and lock nut M8.0. Minimum order quantity 10 pieces.   The ValkCableCare stainless steel Hammerhead M8x20mm from Van der Valk is used to mount the micro-inverter directly to the roof carrier. The...

ValkPro+ Stainless Steel Self-Tapping Bolt M6x20mm TX30. Minimum order quantity 10 pieces.   The M6x20mm stainless steel self-tapping bolts from Van der Valk are used to attach the side and back plates to the aluminum feet within a ValkPro+ system. The VDV773320 has a...

ValkPro+ Aluminium Rear Support L10° Side   The ValkPro+ rear support from Van der Valk is part of the ValkPro+ PV system. This aluminium rear support is mounted on the side of the system. To save time, it is possible to pre-assemble the rear...

ValkPro+ Aluminium Front Foot P/L10° Side   The ValkPro+ front foot from Van der Valk is part of the ValkPro+ PV system. This aluminum front foot is mounted on the side of the system. To save time, it is possible to pre-assemble the back...

ValkPro+ Aluminium Front Foot P/L10° Middle   The ValkPro+ front foot from Van der Valk is part of the ValkPro+ PV system. This aluminium front foot is mounted in the middle of the system. To save time, it is possible to pre-assemble the rear...

Van der Valk ValkAce Trapezium profile 1220mm - minimum order 2 pieces   The aluminum profiles from Van der Valk are essential in ValkAce mounting systems on pitched roofs. Previously, all Van der Valk Side profiles were only suitable for solar panels with a...

Van der Valk ValkAce Trapezoidal profile 2370mm - minimum purchase of 2 pieces   Van der Valk's aluminum Side profiles are essential in ValkPitched - Clamp mounting systems on pitched roofs. Previously, all Van der Valk Side profiles were only suitable for solar panels...

Van der Valk ValkAce Trapezoidal profile 3520mm - minimum order 2 pieces   The aluminium Side profiles from Van der Valk are essential in ValkPitched - Clamp mounting systems on pitched roofs. Previously, all Van der Valk Side profiles were only suitable for solar...

Van der Valk ValkAce Trapezoidal profile 4670mm - minimum order 2 pieces   Van der Valk's aluminum Side profiles are essential in ValkPitched - Clamp mounting systems for pitched roofs. Previously, all Van der Valk Side profiles were only suitable for solar panels with...

Van der Valk ValkAce Trapezoidal profile 5820mm - minimum purchase of 2 pieces   The aluminum side profiles from Van der Valk are essential in ValkPitched - Clamp mounting systems on pitched roofs. Previously, all Van der Valk side profiles were only suitable for...

Van der Valk ValkAce End Clamp grey 721412 - Clamping range 25-40mm - T30   The adjustable aluminium end clamp from Van der Valk is part of the ValkAce series and is used to clamp solar panels to the base profile. The VDV721412 is suitable...

Van der Valk ValkAce End Clamp Black 721412ZW - Clamping range 25-40mm - T30   The adjustable black aluminum end clamp from Van der Valk belongs to the ValkAce series and is used to clamp solar panels onto the base profile. The VDV721412ZW is...

Van der Valk ValkAce Alu. Mid Clamp Grey 721410 - Clamping range 25-40mm - T30 The aluminum mid clamp from Van der Valk belongs to the ValkAce series and is intended to connect and fasten solar panels to each other on the base profile....

Van der Valk ValkAce+ Alu. Slimline Adjustable Roof Hook 729503   The adjustable aluminium Slimline roof hook from Van der Valk belongs to the ValkAce+ series and is suitable for mounting systems on pitched roofs with roof tiles. The Slimline roof hook is not...

Van der Valk ValkAce Slimline roof hook fixed non-adjustable 729505 - range 40-50 mm)   The aluminum Slimline roof hook from Van der Valk is part of the ValkAce series and is suitable for mounting systems on pitched roofs with roof tiles. The Slimline...

Van der Valk ValkAce+ Alu. Slimline Roof Hook 729507   The aluminium Slimline roof hook from Van der Valk belongs to the ValkAce+ series and is suitable for mounting systems on pitched tiled roofs. The Slimline roof hook is not screwed, but slid over...

Van der Valk ValkAce Stainless Steel Strongline roof hook 3 x adjustable 747506   The Stainless Steel Strongline roof hook from Van der Valk is part of the ValkAce series and is suitable for mounting systems on pitched roofs with roof tiles. The Strongline...

Van der Valk ValkAce+ Stainless Steel Strongline roof hook 747507   The Stainless Steel Strongline roof hook from Van der Valk belongs to the ValkAce+ series and is suitable for mounting systems on pitched roofs with roof tiles. The Strongline roof hook is directly...

Van der Valk ValkAce Stainless Steel Plain Tile Roof Hook 747508   The stainless steel Plain Tile roof hook from Van der Valk is part of the ValkAce series and is suitable for mounting systems on standard tiled pitched roofs. ValkAce by Van der...

Van der Valk ValkAce profile connector 749502   The aluminium connector from Van der Valk is used to connect the base profiles together. ValkAce from Van der Valk Solar Systems sets the new standard in mounting systems for pitched tile roofs. Thanks to its...

Van der Valk ValkAce+ ValkGrip 30mm 770230 - also available in black   The Van der Valk ValkAce+ ValkGrip is a panel clamp for quick attachment of solar panels within the ValkAce+ mounting system. With the ValkGrip, the solar panel is clicked into place...

Van der Valk ValkAce+ ValkGrip 30mm black 770230ZW - also available in grey   The Van der Valk ValkAce+ ValkGrip is a panel clamp for quickly securing solar panels within the ValkAce+ mounting system. With the ValkGrip, the solar panel is clicked into place...