CT clamp for measuring currents 50A, 180cm. Datasheet Infinity brochure

Thanks to this solution from Smappee, it is possible to have your 3-phase PV installation communicate intelligently with the Smappee EV charger. The Smappee EV Wall Solar add on consists of: 1x Smappee CT Hub 2x 50A Smappee Current Transformers Smappee Infinity

The Smappee Switch is a smart plug that provides a cost-effective additional method of submetering and smart management for the Smappee Infinity monitoring system. The Switch measures the precise consumption of an appliance or a group of appliances connected to a power strip and...

The P1 meter clicks into the P1 port of your digital meter and shows the power consumption, injection and gas consumption of your home. The P1 meter is suitable for most modern meters in Europe. Can also be used in combination with the Peblar...

Sunny Home Manager 2.0 Controller for intelligent energy management. The Sunny Home Manager 2.0 is the intelligent energy manager from SMA, it enables efficient solar energy use in your home. This optimizes the self-consumption of solar power and significantly reduces electricity costs. To do...

Smappee bus cable 40cm Infinity brochure

The CT Hub is the core component of the Smappee Infinity monitoring system. A CT Hub allows you to connect up to 4 Current Transformers (CTs) or Rogowski coils to measure various currents up to 4000 A. This allows accurate submetering of (a group...

Smappee P1/S1 module - new version 2025 The Smappee P1 module connects directly to the digital meter, providing users with real-time energy data for electricity, gas, and water. It also offers advanced features such as dynamic overload protection and charging using only surplus solar...

The P1 meter clicks into the P1 port of your digital meter and shows the power consumption, injection and gas consumption of your home. The P1 meter is suitable for most modern meters in Europe. Can also be used in combination with the Peblar...

Bidirectional energy meter, single phase 100A, RS485, Modbus-RTU. For power monitoring and energy measurements. It provides the ability to visualize real-time parameters such as three-phase voltage & current, active & reactive power, frequency, positive energy, reverse energy etc. Data sheet

Huawei DTSU666-FE 100A 3F Huawei energy meter for Huawei charging station (S-charger) in combination with an inverter from another brand or without PV (stand-alone Charger). The Huawei Smart Power Sensor DTSU666-FE is an energy meter that can be used in both single-phase and three-phase...

Sungrow energy meter (Chint), 3-phase, max. 80A The Sungrow Three-Phase Smart Energy Meter is specially designed for SGx.xRT and SHx.xRT systems and provides accurate and reliable measurement of electricity consumption in three-phase power installations. Equipped with advanced technology, the Sungrow Three Phase Smart Energy...

CT clamp for measuring currents 50A, 30cm. Datasheet Infinity brochure

EM112 PF.A version (no MID) Wallbox Power Boost Meter 1-phase up to 100A EM112. This energy meter can also be used for other brands. The Wallbox Power Boost Meter is an accessory that can be easily integrated into the installation of a Wallbox charging...

DIN-Rail mounting piece for Smappee Infinity - 4 pieces Infinity brochure

The Smappee Solid core 3 phase CT is generally used for three-phase measurements. 0.2% accuracy class. Connect up to 9 three-phase solid core current transformers in series or combine them with Smappee CT hub to achieve up to 28 inputs and up to a...

The Genius is the link between the monitoring system and the Smappee Cloud and ensures secure storage of data from various components via Ethernet, Wi-Fi or 3G/4G (optional). In the event of a network failure, the data remains stored for two days. The Genius...

The P1 meter clicks into the P1 port of your digital meter and shows the power consumption, injection and gas consumption of your home. The P1 meter is suitable for most modern meters in Europe. Can also be used in combination with the Peblar...

Smappee bus cable 150cm. Infinity brochure

The Easee Equalizer is a small, smart device, designed to optimize your charging experience. The Equalizer connects to the (smart) energy meter and automatically ensures that the total amount of electricity between the Easee EV charger(s) and the building (home, vacation home, apartment building...

Sungrow energy meter 1-phase S100 - 100A - RS485 - incl. CT Designed for residential environments, the Sungrow Single Phase Smart Energy Meter provides accurate and real-time monitoring of your electricity consumption, valuable insights to optimize energy consumption and make informed decisions. Equipped with...

Niko Home Control starter kit energy with three smart plugs, pin earth. The Niko Home Control energy starter kit is an easy-to-install plug-and-play package that makes your home smart and efficient. Connect the kit to your smart meter and get a detailed picture of...

Only sales to installers. To install this device you need an installer account with Charge Amps.    Charge Amps Guard is a smart energy monitor that optimizes charging in relation to other consumers in the home. It can be connected to WiFi or LAN...

Control (a group of) devices remotely with the Smappee Switch or with the Smappee Output module. The Output module can also be used as a control signal for smart devices. Furthermore, you can integrate charging stations and third-party IoT applications via the Smappee App....

Delivery time 5 working days. Wallbox Power Boost Meter 3-phase up to 250A with terminals EM330. Measure: Indirect (3 clamps included) Three-phase Up to 250A Din rail parts: 3 Wallbox EMS manual Use an energy meter with your smart charger to unlock new myWallbox...

Rogowski current coil 1600A for connection to a Smappee CT-Hub. Diameter 12cm internal, 180cm, price per piece. Datasheet Infinity brochure

Delivery time approximately 6 working days. Supplier stock. The Growatt Smart Meter is a one-to-one solution for three-phase installations to limit the export limit of the grid. It is compatible with Growatt string inverters up to 50kW. With RS485 communication and direct connection, the...

Bidirectional energy meter, three phase, 100A/40mA, RS485, Modbus RTU. For power monitoring and energy measurements. It provides the ability to visualize real-time parameters such as three-phase voltage & current, active & reactive power, frequency, positive energy, reverse energy etc. Datasheet Manual

The LUQAS module is a six-function energy management system (EMS) that operates completely independently (stand-alone). All you need is a digital meter. With a single module, you can understand your home's energy flows and intelligently manage your high-energy appliances to reduce your energy bill....

Growatt Smart Meter (3-phase) is a one-to-one solution for grid export limitation and self-consumption monitoring. It is compatible with Growatt inverters. With RS485 communication and direct connection with inverter, it is easy to install and cost-effective. Class 1 measurement accuracy. LCD display, easy to...

Huawei Direct Power Meter DTSU666-HW/YDS60-80 80A, RS485, Modbus-RTU. Data sheet

Niko Smart plug with pin earth, Zigbee 3.0. Use the smart plug to switch a plugged-in device on and off and to measure the device's energy consumption. Once you insert the smart plug into a socket, you can switch the plugged-in device on and...

Smappee Gas & Water - Magnetic sensor cable. Info

Rayleigh RI-CTS024 series: Mini split core current transformer 100/5A Class 1, single-phase. CT clamp for measuring currents up to 100A, 1m of wiring, max. 24mm conductor, 50mm wide. (Photo is 200A/5A version) Datasheet

The GM3000 Smart Meter from GoodWe is small and compact with its dimensions of 36x85x66.5mm. It is also easy to install and very easy to operate. With its 3-phase grid system connection, it can sense the voltage, current, power and energy and work with...

Includes: - 1x Smappee Genius - 1x Smappee Power box - 3x Smappee CT hub - 12x 50A CT 30 cm cable - 30 min remote installation assistance   Infinity Manual (EN)

The Power Box is the heart of the Smappee Infinity monitoring system. It measures the voltage and calculates the active and reactive power. It also supplies the other components with auxiliary power and sends its data via the Smappee Bus.   Infinity brochure

Thanks to this solution from Smappee, it is possible to have your 3-phase PV installation communicate intelligently with the Smappee EV charger. The Smappee EV Wall Solar add on consists of: 1x Smappee CT Hub 2x 50A Smappee Current Transformers Smappee Infinity

Smappee P1/S1 module - new version 2025 The Smappee P1 module connects directly to the digital meter, providing users with real-time energy data for electricity, gas, and water. It also offers advanced features such as dynamic overload protection and charging using only surplus solar...

Smappee P1/S1 module - new version 2025 The Smappee P1 module connects directly to the digital meter, providing users with real-time energy data for electricity, gas, and water. It also offers advanced features such as dynamic overload protection and charging using only surplus solar...

Wallbox Power Boost Meter 1-phase up to 100A EM112 Carlo Gavazzi. This energy meter can also be used for other brands. The Wallbox Power Boost Meter is an accessory that can be easily integrated into the installation of a Wallbox charging station. The Power...

HomeWizard Energy Display - insight into the view With the Display your consumption, costs and generation are always visible. Create your own screen and determine what you want to see. The HomeWizard Energy Display visualizes your energy consumption and the associated costs. This way...

The SDM230 is a single-phase energy meter with a fixed pulsating output. Suitable for DIN rail mounting, equipped with IP51 protection and direct connection up to 100A. Certified according to EU Directive 2014/32/EU, with MID certificate number 0120 / SGS0206 (UK certified). Can be...

The SDM230 is a single-phase energy meter with a fixed pulsating output. Suitable for DIN rail mounting, equipped with IP51 protection and direct connection up to 100A, modbus RS485 version. Can be used for example for Solplanet inverters and EV chargers. Datasheet

Sungrow iHomeManager ASQ00297 Energy management system for homes. The Sungrow iHomeManager ASQ00297 is a compact and smart energy management system for residential solar installations. Thanks to seamless integration with Sungrow inverters and batteries the system manages energy flows intelligently and maximizes self-consumption. Key Features: AI-driven predictions: Optimizes energy usage...

The P1 meter clicks into the P1 port of your digital meter and shows the power consumption, injection and gas consumption of your home. The P1 meter is suitable for most modern meters in Europe. Can also be used in combination with the Peblar...

230/400V, 3-phase 3 CTs 120A included Communication: Wifi, LAN, RS485 The GoodWe HomeKit is a solution designed to monitor the energy consumption of connected appliances in real time, 24 hours a day. The kit only requires an internet connection. The product consists of a...

230V, 1-phase 2 CTs 120A included Communication: Wifi, LAN, RS485 The GoodWe HomeKit is a solution designed to monitor the energy consumption of connected appliances in real time, 24 hours a day. The kit only requires an internet connection. The product consists of a...

The Growatt Smart Meter is a one-to-one solution for single-phase installations to limit the export limit of the grid. It is compatible with Growatt string inverters up to 50kW. With RS485 communication and direct connection, the Smart Meter is easy to install and cost-saving....

Delivery time 10 working days. Supplier stock. Growatt Smart Meter (3-phase) is a one-to-one solution for grid export limitation and self-consumption monitoring. It is compatible with Growatt inverters. With RS485 communication and direct connection with inverter, it is easy to install and cost-effective. Class...