ValkPitched Kst. Mid-clamp cover - Black For a PV installation where most of the components, including the panels, are black, it is often desirable from an aesthetic perspective to also have black clamps. In addition to the range of black anodized clamps, it is...

ValkPitched Alu connector for Side++ profile with 4x hammer head bolt M8x20mm - black    The black aluminum connector from Van der Valk is used to connect the Side++ base profiles to each other. The VDV724863ZW comes with 4x hammer head bolts M8x20.  

ValkPro+ Rubber Block for Gravel Roof   The Van der Valk ValkPro+ Max NextGen raised gravel block is designed to provide extra height and stability when installing solar panel systems on gravel roofs. This block serves as a spacer and leveling element within the...

ValkPro+ rear panel galvanized L10° 1780mm (panel length 1520-1720mm)   To shield the PV installation at the rear, you mount the galvanized steel back plate here. The back plates are placed in the channel of the aluminum rear feet and secured with self-tapping screws....

Stainless steel washer M8 DIN 440R M8x28x3mm (9x28x3 mm) per 20 pieces   The stainless steel washer is used to distribute the pressure of the nut and bolt evenly on the material. The VDV774009 has dimensions of 9x28x3mm    

ValkPro+ Rubber Tile Support Click 250 x 75 x 90 mm   The Van der Valk ValkPro+ Max NextGen Tile Support is designed for stable and secure support of ballast tiles within the ValkPro+ mounting system. This plastic spacer ensures correct positioning and distribution...

ValkPro+ Galvanized Roof Carrier 2500 x 1.5 mm and coupling piece 87 mm. Minimum purchase 2 pieces.   The ValkPro+ galvanized steel roof carrier from Van der Valk is used to secure the PV installation on flat roofs. The roof carrier is placed over...

ValkSide++ Profile 3520 mm XXL. Minimum purchase 4 pieces.   Van der Valk's aluminum Side++ profiles are essential in ValkPitched - Clamp mounting systems on pitched roofs. Thanks to the extra long Side++ profiles, new generation solar panels with a maximum panel width of...

ValkSide++ Profile 5820 mm XXL. Minimum purchase of 4 pieces.   The aluminum Side profiles from Van der Valk are essential in ValkPitched - Clamp mounting systems on pitched roofs. Previously, all Van der Valk Side profiles were only suitable for solar panels with...

ValkPro+ Aluminium Rear Support P10° middle 724670   The ValkPro+ rear support from Van der Valk is part of the ValkPro+ PV system. This aluminum rear support is mounted in the middle of the system. To save time, it is possible to pre-assemble the...

ValkPitched Stainless Steel Strongline Roof Hook - 3x adjustable + hammer head bolt + flanged knurled nut   The stainless steel Strongline roof hook from Van der Valk belongs to the ValkPitched - Clamp series and is suitable for mounting systems on pitched roofs...

ValkPitched Roof Hook Strongline Stainless Steel Twisted 747845   The Stainless Steel Strongline roof hook Twist from Van der Valk is part of the ValkPitched - Clamp series and is suitable for mounting systems on pitched roofs with roof tiles. The Strongline roof hook...

Black plastic end cap for Side++ and trapezoidal profile The black end cap from Van der Valk is used with the semi-black and fully-black ValkPitched - Clamp systems. For a neat, finished look of your system, slide the end cap over the ends of...

ValkPro+ Galvanized Side Plate P10° Left   To shield the PV installation on the left side, you can mount the galvanized steel side plate here. Each side plate is attached to the side of the aluminum feet with three self-tapping screws. The VDV742532 is...

ValkPro+ Galvanized Side Plate Universal L10°   To enclose the PV installation on the left or right side, you can mount the galvanized steel side plate here. Each side plate is attached to the side of the aluminum feet with three self-tapping screws. The...

ValkPitched Micro-Inverter & Optimizer Clamp The aluminum clamp for micro-inverters and power optimizers allows you to easily attach your inverter and optimizer to your mounting system, preventing loss of yield from your PV installation. The VDV774223 is attached to the Side++ profile and trapezoidal...

ValkPro+ Galvanized Side Plate P10° Right   To shield the PV installation on the right side, you can mount the galvanized steel side plate here. Each side plate is attached to the side of the aluminum feet with three self-tapping screws. The VDV742533 is...

ValkPro+ Galvanized Ballast Carrier P10° 1359 mm   With the ValkPro+ galvanized steel ballast carrier from Van der Valk, it is possible to add weight to PV installations. Place gravel or paving stones in the ballast carrier and position it perpendicularly to the ValkPro+...

ValkPro+ Galvanized Rear Plate L10° 1980 mm. Minimum purchase 4 pieces.   To shield the PV installation at the back, mount the galvanized steel rear plate here. The rear plates are placed in the channel of the aluminum rear feet and secured with self-tapping...

ValkPro+ Galvanized Roof Carrier 2300 x 1.5 mm - minimum order 2 pieces   The ValkPro+ galvanized steel roof carrier from Van der Valk is used to secure the PV installation on flat roofs. The roof carrier is placed over the center of the...

ValkPro+ Aluminum Rear Support L10° Middle   The ValkPro+ rear support from Van der Valk is part of the ValkPro+ PV system. This aluminum rear support is mounted in the middle of the system. To save time, it is possible to pre-assemble the rear...

ValkPro+ Galvanized Backplate P10° 1360 mm   To shield the PV installation at the back, you mount the galvanized steel backplate here. The backplates are placed in the channel of the aluminum rear feet and secured with self-tapping screws. If the backplates overlap, they...

Huawei SUN2000-10K-MAP0 3-phase battery-ready inverter. Delivery time 5 working days. Also available in BE version max. 10kVA, contact us for more info.   The hybrid Huawei inverters from the SUN2000 MAP0 series are suitable for residential PV installations with a 3-phase connection. Battery ready...

Huawei SUN2000-4K-LB0 1-phase battery-ready inverter. Delivery time 5 working days.    The battery-ready hybrid inverters from the Huawei SUN2000 LB0 series are suitable for residential PV installations with a single-phase connection. Advantages of the Huawei LB0 series: Battery-ready (can be combined with the Huawei...

Huawei SUN2000-3.68KTL-LB0 1-phase battery ready inverter. Delivery time 5 working days. The battery-ready hybrid inverters from Huawei's SUN2000 LB0 series are suitable for residential PV installations with a 1-phase connection. Advantages of the Huawei LB0 series: Battery ready (can be combined with the Huawei...

ValkTriple solar array system for 3 solar panels (solar panels not included) - new version   The ValkTriple mounting kit from Van der Valk is used for a solar array of three panels on a flat roof. The ValkTriple Mounting Kit consists of the...

Ubbink Solar Cable Roof Flashing 15-55° Tiled Roof   The Ubbink Solar Cable Flashing is suitable for all tiled roofs with a pitch of 15° to 55°. There is no direct contact with the roof tile, which prevents cable wear and keeps your roof...

Minimum purchase of 4 pieces (unless project order >100,- euro). Price per piece. Esdec FlatFix Fusion Wind Deflector right black (base profile 940mm) 1007225-B The innovative and super-fast system for flat roofs. FlatFix Fusion is a revolutionary and lightweight flat roof mounting system for...

Minimum purchase 4 pieces (unless project order >100,- euro). Price per piece. Esdec FlatFix Fusion Wind Deflector Left black (base profile 940mm) 1007224-B The innovative and super-fast system for flat roofs. FlatFix Fusion is a revolutionary and lightweight flat roof mounting system for solar...

Minimum purchase 4 pieces (unless project order > €100). Price per piece. FlatFix Fusion Wind Deflector Rear 2000 Black 1007585-B The innovative and super-fast system for flat roofs. FlatFix Fusion is a revolutionary and lightweight flat roof mounting system for solar panels on large...