ValkSide++ Profile 5820 mm XXL. Minimum purchase of 4 pieces.   The aluminum Side profiles from Van der Valk are essential in ValkPitched - Clamp mounting systems on pitched roofs. Previously, all Van der Valk Side profiles were only suitable for solar panels with...

ValkPitched Stainless Steel Self-Drilling Screw M6x25mm - per 20 pieces The M6x25mm stainless steel sheet metal screw from Van der Valk belongs to the ValkPitched - Trapezoidal series and is suitable for mounting aluminum trapezoidal profiles on steel corrugated roofs. The VDV773225 has a...

ValkPro+ Aluminium Rear Support P10° middle 724670   The ValkPro+ rear support from Van der Valk is part of the ValkPro+ PV system. This aluminum rear support is mounted in the middle of the system. To save time, it is possible to pre-assemble the...

ValkPitched Stainless Steel Strongline Roof Hook - 3x adjustable + hammer head bolt + flanged knurled nut   The stainless steel Strongline roof hook from Van der Valk belongs to the ValkPitched - Clamp series and is suitable for mounting systems on pitched roofs...

ValkPitched Roof Hook Strongline Stainless Steel Twisted 747845   The Stainless Steel Strongline roof hook Twist from Van der Valk is part of the ValkPitched - Clamp series and is suitable for mounting systems on pitched roofs with roof tiles. The Strongline roof hook...

Black plastic end cap for Side++ and trapezoidal profile The black end cap from Van der Valk is used with the semi-black and fully-black ValkPitched - Clamp systems. For a neat, finished look of your system, slide the end cap over the ends of...

ValkPro+ Aluminium Rear Support P10° Side   The ValkPro+ rear support from Van der Valk is part of the ValkPro+ PV system. This aluminium rear support is mounted on the side of the system. To save time, it is possible to pre-assemble the rear...

ValkPro+ Galvanized Side Plate P10° Left   To shield the PV installation on the left side, you can mount the galvanized steel side plate here. Each side plate is attached to the side of the aluminum feet with three self-tapping screws. The VDV742532 is...

ValkPro+ Galvanized Side Plate Universal L10°   To enclose the PV installation on the left or right side, you can mount the galvanized steel side plate here. Each side plate is attached to the side of the aluminum feet with three self-tapping screws. The...

ValkPitched Micro-Inverter & Optimizer Clamp The aluminum clamp for micro-inverters and power optimizers allows you to easily attach your inverter and optimizer to your mounting system, preventing loss of yield from your PV installation. The VDV774223 is attached to the Side++ profile and trapezoidal...

ValkPro+ Galvanized Side Plate P10° Right   To shield the PV installation on the right side, you can mount the galvanized steel side plate here. Each side plate is attached to the side of the aluminum feet with three self-tapping screws. The VDV742533 is...

ValkPitched Universal End Clamp Black for Side+ profile The adjustable black aluminium end clamp from Van der Valk is part of the ValkPitched - Clamp series and is used to secure solar panels to the base profile. The VDV721552ZW is suitable for pitched roofs...

ValkPro+ Galvanized Ballast Carrier P10° 1359 mm   With the ValkPro+ galvanized steel ballast carrier from Van der Valk, it is possible to add weight to PV installations. Place gravel or paving stones in the ballast carrier and position it perpendicularly to the ValkPro+...

ValkPro+ Galvanized Rear Plate L10° 1980 mm. Minimum purchase 4 pieces.   To shield the PV installation at the back, mount the galvanized steel rear plate here. The rear plates are placed in the channel of the aluminum rear feet and secured with self-tapping...

ValkPitched Black Universal Mid Clamp   The black aluminum mid clamp from Van der Valk is part of the ValkPitched - Clamp series and is intended to connect solar panels to each other and fasten them to the base profile. The clamp is mounted...

ValkPro+ Galvanized Roof Support 1500 x 1.5 mm with connector. Minimum purchase of 2 units. The ValkPro+ galvanized steel roof support from Van der Valk is used to secure the PV installation on flat roofs. The roof support is placed over the center of...

ValkPro+ Galvanized Roof Carrier 2300 x 1.5 mm - minimum order 2 pieces   The ValkPro+ galvanized steel roof carrier from Van der Valk is used to secure the PV installation on flat roofs. The roof carrier is placed over the center of the...

ValkPro+ Aluminum Rear Support L10° Middle   The ValkPro+ rear support from Van der Valk is part of the ValkPro+ PV system. This aluminum rear support is mounted in the middle of the system. To save time, it is possible to pre-assemble the rear...

ValkPro+ Galvanized Backplate P10° 1360 mm   To shield the PV installation at the back, you mount the galvanized steel backplate here. The backplates are placed in the channel of the aluminum rear feet and secured with self-tapping screws. If the backplates overlap, they...

Stainless steel ValkCableCare hammerhead bolt M8x20 mm with washer M8 28x3 mm and lock nut M8.0. Minimum order quantity 10 pieces.   The ValkCableCare stainless steel Hammerhead M8x20mm from Van der Valk is used to mount the micro-inverter directly to the roof carrier. The...

ValkPro+ Stainless Steel Self-Tapping Bolt M6x20mm TX30. Minimum order quantity 10 pieces.   The M6x20mm stainless steel self-tapping bolts from Van der Valk are used to attach the side and back plates to the aluminum feet within a ValkPro+ system. The VDV773320 has a...

ValkPro+ Aluminium Rear Support L10° Side   The ValkPro+ rear support from Van der Valk is part of the ValkPro+ PV system. This aluminium rear support is mounted on the side of the system. To save time, it is possible to pre-assemble the rear...

ValkPro+ Rubber Tile Support 729636. Minimum order 4 pieces.   The Van der Valk ValkPro+ Max NextGen Tile Support is designed to stably and securely support ballast tiles within the ValkPro+ mounting system. This plastic spacer ensures the correct positioning and distribution of ballast...

ValkPro+ Aluminium Front Foot P/L10° Side   The ValkPro+ front foot from Van der Valk is part of the ValkPro+ PV system. This aluminum front foot is mounted on the side of the system. To save time, it is possible to pre-assemble the back...

ValkPro+ Aluminium Front Foot P/L10° Middle   The ValkPro+ front foot from Van der Valk is part of the ValkPro+ PV system. This aluminium front foot is mounted in the middle of the system. To save time, it is possible to pre-assemble the rear...

Stäubli MC4 EVO2 connector 4-6mm² female PV-KBT4-EVO 2/6I-UR. Sold per 2 pieces.      PDF datasheet    

Stäubli MC4 EVO2 connector male 4-6mm² PV-KST4-EVO 2/6I-UR. Sold per 2 pieces.      PDF datasheet    

Earthing cable 6mm² B2CA H07Z1-K tinned green/yellow roll 100m. B2CA: for installations where very high demands are placed on fire safety. Designed for the solar industry (H07Z1-K tinned and UV resistant). Thanks to its very high-quality technical properties, this cable can be installed in...

ValkTriple solar array system for 3 solar panels (solar panels not included) - new version   The ValkTriple mounting kit from Van der Valk is used for a solar array of three panels on a flat roof. The ValkTriple Mounting Kit consists of the...

ValkDouble solar mounting system for 2 solar panels (solar panels not included) - new version   The ValkDouble mounting kit from Van der Valk is used for a solar array for two panels on a flat roof. The ValkDouble mounting kit consists of materials...