Black plastic end cap for Side++ and trapezoidal profile The black end cap from Van der Valk is used with the semi-black and fully-black ValkPitched - Clamp systems. For a neat, finished look of your system, slide the end cap over the ends of...

ValkPitched Micro-Inverter & Optimizer Clamp The aluminum clamp for micro-inverters and power optimizers allows you to easily attach your inverter and optimizer to your mounting system, preventing loss of yield from your PV installation. The VDV774223 is attached to the Side++ profile and trapezoidal...

ValkPitched Stainless Steel Strongline Roof Hook - 3x adjustable + hammer head bolt + flanged knurled nut   The stainless steel Strongline roof hook from Van der Valk belongs to the ValkPitched - Clamp series and is suitable for mounting systems on pitched roofs...

ValkPitched Stainless Steel Self-Drilling Screw M6x25mm - per 20 pieces The M6x25mm stainless steel sheet metal screw from Van der Valk belongs to the ValkPitched - Trapezoidal series and is suitable for mounting aluminum trapezoidal profiles on steel corrugated roofs. The VDV773225 has a...

ValkPitched Universal End Clamp   ValkPitched Universal End Clamp. Universal end clamp made of anodized aluminium. The clamp comes with a stainless steel nut and plastic spacer. T30 - clamping range 28-50mm. Minimum order quantity 5 pieces.

ValkPitched Universal End Clamp Black for Side+ profile The adjustable black aluminium end clamp from Van der Valk is part of the ValkPitched - Clamp series and is used to secure solar panels to the base profile. The VDV721552ZW is suitable for pitched roofs...

ValkPitched Black Universal Mid Clamp   The black aluminum mid clamp from Van der Valk is part of the ValkPitched - Clamp series and is intended to connect solar panels to each other and fasten them to the base profile. The clamp is mounted...

ValkPro+ rear panel galvanized L10° 1780mm (panel length 1520-1720mm)   To shield the PV installation at the rear, you mount the galvanized steel back plate here. The back plates are placed in the channel of the aluminum rear feet and secured with self-tapping screws....

ValkPro+ Aluminum Rear Support L10° Middle   The ValkPro+ rear support from Van der Valk is part of the ValkPro+ PV system. This aluminum rear support is mounted in the middle of the system. To save time, it is possible to pre-assemble the rear...

ValkPro+ Aluminium Rear Support L10° Side   The ValkPro+ rear support from Van der Valk is part of the ValkPro+ PV system. This aluminium rear support is mounted on the side of the system. To save time, it is possible to pre-assemble the rear...

ValkPro+ Aluminium Rear Support P10° middle 724670   The ValkPro+ rear support from Van der Valk is part of the ValkPro+ PV system. This aluminum rear support is mounted in the middle of the system. To save time, it is possible to pre-assemble the...

ValkPro+ Aluminium Rear Support P10° Side   The ValkPro+ rear support from Van der Valk is part of the ValkPro+ PV system. This aluminium rear support is mounted on the side of the system. To save time, it is possible to pre-assemble the rear...

ValkPro+ Aluminium Front Foot P/L10° Middle   The ValkPro+ front foot from Van der Valk is part of the ValkPro+ PV system. This aluminium front foot is mounted in the middle of the system. To save time, it is possible to pre-assemble the rear...

ValkPro+ Aluminium Front Foot P/L10° Side   The ValkPro+ front foot from Van der Valk is part of the ValkPro+ PV system. This aluminum front foot is mounted on the side of the system. To save time, it is possible to pre-assemble the back...

ValkPro+ Galvanized Ballast Carrier P10° 1359 mm   With the ValkPro+ galvanized steel ballast carrier from Van der Valk, it is possible to add weight to PV installations. Place gravel or paving stones in the ballast carrier and position it perpendicularly to the ValkPro+...

ValkPro+ Galvanized Rear Plate L10° 1980 mm. Minimum purchase 4 pieces.   To shield the PV installation at the back, mount the galvanized steel rear plate here. The rear plates are placed in the channel of the aluminum rear feet and secured with self-tapping...

ValkPro+ Galvanized Backplate P10° 1360 mm   To shield the PV installation at the back, you mount the galvanized steel backplate here. The backplates are placed in the channel of the aluminum rear feet and secured with self-tapping screws. If the backplates overlap, they...

ValkPro+ Galvanized Roof Support 1500 x 1.5 mm with connector. Minimum purchase of 2 units. The ValkPro+ galvanized steel roof support from Van der Valk is used to secure the PV installation on flat roofs. The roof support is placed over the center of...

ValkPro+ Galvanized Roof Carrier 2300 x 1.5 mm - minimum order 2 pieces   The ValkPro+ galvanized steel roof carrier from Van der Valk is used to secure the PV installation on flat roofs. The roof carrier is placed over the center of the...

ValkPro+ Galvanized Roof Carrier 2500 x 1.5 mm and coupling piece 87 mm. Minimum purchase 2 pieces.   The ValkPro+ galvanized steel roof carrier from Van der Valk is used to secure the PV installation on flat roofs. The roof carrier is placed over...

ValkPro+ Galvanized Side Plate P10° Left   To shield the PV installation on the left side, you can mount the galvanized steel side plate here. Each side plate is attached to the side of the aluminum feet with three self-tapping screws. The VDV742532 is...

ValkPro+ Galvanized Side Plate P10° Right   To shield the PV installation on the right side, you can mount the galvanized steel side plate here. Each side plate is attached to the side of the aluminum feet with three self-tapping screws. The VDV742533 is...

ValkPro+ Galvanized Side Plate Universal L10°   To enclose the PV installation on the left or right side, you can mount the galvanized steel side plate here. Each side plate is attached to the side of the aluminum feet with three self-tapping screws. The...

ValkPro+ Rubber Tile Support Click 250 x 75 x 90 mm   The Van der Valk ValkPro+ Max NextGen Tile Support is designed for stable and secure support of ballast tiles within the ValkPro+ mounting system. This plastic spacer ensures correct positioning and distribution...

ValkPro+ Rubber Block for Gravel Roof   The Van der Valk ValkPro+ Max NextGen raised gravel block is designed to provide extra height and stability when installing solar panel systems on gravel roofs. This block serves as a spacer and leveling element within the...

Stainless steel ValkCableCare hammerhead bolt M8x20 mm with washer M8 28x3 mm and lock nut M8.0. Minimum order quantity 10 pieces.   The ValkCableCare stainless steel Hammerhead M8x20mm from Van der Valk is used to mount the micro-inverter directly to the roof carrier. The...

ValkPro+ Stainless Steel Self-Tapping Bolt M6x20mm TX30. Minimum order quantity 10 pieces.   The M6x20mm stainless steel self-tapping bolts from Van der Valk are used to attach the side and back plates to the aluminum feet within a ValkPro+ system. The VDV773320 has a...

Stainless steel washer M8 DIN 440R M8x28x3mm (9x28x3 mm) per 20 pieces   The stainless steel washer is used to distribute the pressure of the nut and bolt evenly on the material. The VDV774009 has dimensions of 9x28x3mm    

ValkPro+ Rubber Tile Support 729636. Minimum order 4 pieces.   The Van der Valk ValkPro+ Max NextGen Tile Support is designed to stably and securely support ballast tiles within the ValkPro+ mounting system. This plastic spacer ensures the correct positioning and distribution of ballast...

ValkQuatro solar mounting system for 4 solar panels (solar panels not included)    The ValkQuattro mounting package from Van der Valk is used for a solar mounting system for four panels on a flat roof. The ValkQuattro Mounting package consists of materials of the...