Niko Wall Socket 2P+A 16A, connected Zigbee, plug terminals

The connected switchable outlet communicates wirelessly with the wireless smart hub for Niko Home Control (552-00001). You can also use this device in a bus wiring installation with the wireless bridge for Niko Home Control (550-00640).

Together with the smart hub or a wireless bridge, you can connect it to a wireless switch without extra wiring. Moreover, you can link the plugged-in device to handy routines such as an all-off/all-on function or calendar functions and control it remotely via the Niko Home app. Additionally, there is a built-in function to measure consumption, so you can save energy by viewing the energy data of the plugged-in device in the Niko Home app. Use the connected switchable outlet with the 'peak mode' and 'solar mode' routines to optimize your energy production and consumption.

Know that you can also use the outlet standalone as a classic outlet. It is equipped with a standard built-in protection against overheating and overcurrent for optimal safety.

Wires that stay in place:

• wire is held firmly thanks to the high-quality plug-in clamp with long service life, tested according to the standard
• the unlocking of the guides is at the front on all mechanisms, so the wiring cannot push on the unlocking when it is pushed into the flush-mounted box and the wires cannot come loose

Faster and easier to install:

• all connection terminals are located on the top side of the base:
 – so that all wires can be cut and stripped to the same length.
 – so that there is more space under the mechanism to easily bend the wires and place the mechanism in the flush-mounted box, without the wiring pushing the mechanism back up.

Niko quality:

• long service life, because the plug-in clamp remains within the standard limits during heating and voltage drop.
• metal base is firmly fixed to the wall, even on uneven walls, does not break, and is not subject to stress cracking (small cracks).
• sturdy metal claws with large engagement depth (31 mm) stay in place during installation and can be firmly screwed in, so outlets remain fixed in the wall and mechanisms do not become misaligned.

Technical data:

• Compatible with the wireless bridge
• Input voltage: 230 Vac ± 10%, 50 Hz
• Wire capacity: 2 x 2.5 mm²
• Standby power consumption: 0.15 W
• Maximum load: 16 A / 3680 W

Technical sheet NL

Manual NL